>> Click here to return to FAQ list

Q: What information does Royston Glass need to manufacture a bespoke Splashback?

A: In order to manufacture your bespoke Splashback, Royston glass requires the following information:

  • The overall width and height of the Splashback (in mm, to the widest and highest point)
  • For any curved edges, a paper, cardboard or MDF template is required so we can manufacture your bespoke Splashback to the exact parameters you require.
  • The location (to center) of any Socket Cut-outs you may require, and whether the cut-out should accommodate single or double sockets.

Alternatively, Royston Glass offers a full Template & Installation service covering the whole mainland UK. For more information about this service, please feel free to Contact Us, or give us a call for friendly, no obligation advice.

Our Glass Splashbacks are manufactured in 2 different finishes: Classic Gloss, and Matt.

The Classic Gloss Finish utilizes the high shine, reflective qualities of the glass the Splashback is made from. Because our Splashbacks are back painted, these qualities are present on the front surface of your Splashback, giving a Gloss Finish.

Our Matt Finish Splashbacks however have undergone an additional process during manufacture, meaning the front surface of the Splashback no longer has the reflective shine of the classic finish, but has instead a Matt finish. This finish means Splashbacks manufactured using this glass are more subtle than their gloss cousins, introducing colour to a room without the same bang, but with no less impact.

×
Continue Shopping Proceed to Checkout ×